DMX 512 Wireless Controller for Beam Light / 3-Pin Male or Female
Jack / 400M
1. maximum control receiver: 16
2. the longest distance: 250 meters (barrier-free situation)
3. Size: 153X147X41
4. Power: 100-240V, 50 / 50HZ
5. Weight: 0.5KG (including power)
6. DMX channels: 512 channels (each receiver)
7. use the 2.4GHZ W-LAN wireless network, with the use of FHSS jump
Frequency spread spectrum mode and TDMA time division multiple
access mode wireless machine is not
8. a main transmitter can be freely set the number of channels,
There are 512 channels
9. When you use multiple master transmitters at the same time, you
can set up to 16 frequencies
Road, that is, can control up to 8192 lamp or 8192 receivers.
10. This product is very professional, is irreplaceable easy to use
Multiple simultaneous use can be achieved when you want to control
The lights are especially on the building.
11. This product is generally used in a more professional building
or occasion or
It is the place where you need to control the lighting of complex
Is based on W-LAN wireless theory, the use of IP address related
Knowledge, you can quickly learn to use
12. FHSS (frequency hopping spread spectrum mode)
13. signal in the shortest time (about 0.1 seconds) by frequency
① FM key: the use of each click on the frequency (channel) up to
Add a channel from "0" to "9" and repeat the loop.
② Channel display: Displays the current channel number from "0" to
"9"; Note: the receiver and the transmitter side of the channel
must be consistent
Can guarantee the normal transmission of 512 signal. Recommended
"2" "3" "4".
③ to determine the key: each time the channel before the first
press the key to determine the key ③,
Then the channel display light ② began to flash, then you can press
Key ①, elected the required frequency after the point; and then
long press ③ to determine,
At this time ② stop flashing, the channel can be used normally.
(Note: such as
If the channel display lamp ② is flashing, it can not be used
Set the key so that ② stop flashing after the normal use)
④ Power indicator: When the power is properly plugged, this light
⑤ signal indicator: the transmitter, when the DMX512 signal into
the open when
Blinks; the receiver starts blinking when it receives 512 signals.
⑥ Power input: Please use the original AC TO Dc power adapter;
Do not use other power adapters.
⑦ antenna interface: the interface for the SMA RF antenna
interface, when used to
The antenna can be tightened on top.
⑧485 line interface: for the standard 512 interface
|Carton box or Flight case|
Express (DHL, UPS, Fedex) : 3-7working days
Cargo Air: 5-10 working days
Cargo Sea: 25-40 working days
|T/T, Paypal, Western Union|
OEM/ ODM/ Own Brand
|can be provided|
|CE & ROHS|